| you are: Stenovye pottery
The Brick has the building easy the same sizes, as an ordinary brick, but it is much easier than the last - volume weight of an easy brick 700-1450 кгм3. It produce from clay, diatomita and trepela with obligatory introduction of burning out additives. Rather small heat conductivity of this brick gives the chance to carry out external walls in the thickness 38-52 see
Hollow ceramic stones produce from fusible glin with number of plasticity of Pl=15-25. Multihollow stones form only on vacuum pressah. The sizes of stones more than brick, therefore their application raises labour productivity at a laying of walls, and also leads to reduction of quantity of seams. Despite the big hollowness (25 37%), marks of ceramic stones (М75-250) almost same as at a continuous brick, is absent only М300. Therefore ceramic stones apply for frame and bearing walls.
Large stenovye the panels made at factory from a brick or ceramic stones, are applied in modular housing construction. Brick panels of external walls let out three - two- and single-layered. The three-layer panel consists of two brick external layers, 65 mm everyone by thickness, in the middle stack a layer of a heater in the thickness of 100 mm (mineralovatnye plates, etc.). The general thickness of the three-layer panel of Emeste with internal and external facing - 280 mm. The two-layer panel consists of one layer of a brick on an edge (its thickness of 120 mm) and a heater layer (tolde paste a face sheet on a kraft-paper with an apportion on certain drawing, receiving ' carpets ' in the size 398X598 mm. A thickness of a seam between tiles of 2 mm. On laid on the floor basis plastic rastvornuju a mix stack (tiles downwards) typed ' a carpet '.
|
